Essays and exam

Practical work and written report

The seminar will concentrate on the MSc. thesis work. It is suitable for students who are in/approaching to the MSc thesis writing procedure. It is recommended to the students in their 2nd year of MSc degree studies.

Course related material will be uploaded and maintained in Moodle.

Please send your updated study plan to teacher before first seminar meeting.

Advanced studies (ok as optional advanced studies in SDE programme)

• TIE-21107 Software Engineering Methodologies, 5 cr, periods 3-4 in TUT
• TIE-21307 Large Scale Software Design, 5 cr, periods 3-4 in TUT
• TIE-20306 Principles of Programming Languages, 5 cr, periods1-2 in TUT

Intermediate studies (ok as optional studies)

• TIE-23546 Cloud platforms, 5 cr, periods1-2 in TUT

1. Check the courses in Study offerings.
2. Update your personal study plan (fill in the TUT course) and send it to your study advisor for approval.
3. Apply for study right in Service for Cross-Institutional Studies.
4. Note the enrollment deadlines in TUT.

Enroll on the course TIETA6 Data Structures in NettiOpsu

Self studying, weekly excercises, practical work, and exam.

To enroll the course, a Demola project application is required

Intermediate studies (ok as optional studies)

• TIE-23546 Cloud platforms, 5 cr, periods1-2 in TUT

1. Check the courses in Study offerings.
2. Update your personal study plan (fill in the TUT course) and send it to your study advisor for approval.
3. Apply for study right in Service for Cross-Institutional Studies

Teachers:

• Zheying Zhang (SDE)
• Jaakko Peltonen (CBDA)
• Martti Juhola (CBDA)

This part of the Orientation Course is compulsory also to new Finnish students selected in spring 2018.

In cases where more students register for a course than space allows, priority is assigned as follows:

1. First priority is given to the degree students of the University of Tampere.
2. Second priority is given to the exchange students of the University of Tampere.
3. Third priority is given to the Tampere3 students and to the high school students of the UTA Teacher Training School.

In addition, there is a quota of 5 for the Open University students in every group.

In cases where more students register for a course than space allows, priority is assigned as follows:

1. First priority is given to the degree students of the University of Tampere.
2. Second priority is given to the exchange students of the University of Tampere.
3. Third priority is given to the Tampere3 students and to the high school students of the UTA Teacher Training School.

In addition, there is a quota of 5 for the Open University students in every group.

This module is made up of class sessions including group work (20 hours), as well as independent out of class tasks (61 hours). The module will be three periods long and will take place in the autumn semester of the first year of the master’s degree programme.

If you wish to complete the course during the academic year 2018-2019, contact the teacher no later than March 15, 2019.

This module (54 hours) is online apart from individual teacher-student tutorials for discussion of the submitted thesis extract. The work consists of readings, group analysis tasks and thesis writing work. Students should take the module after their research proposal has been accepted by their programme and they are about to embark upon the writing of their thesis.

Essays and exam

Practical work and written report

The seminar will concentrate on the MSc. thesis work. It is suitable for students who are in/approaching to the MSc thesis writing procedure. It is recommended to the students in their 2nd year of MSc degree studies.

Course related material will be uploaded and maintained in Moodle.

Please send your updated study plan to teacher before first seminar meeting.

Advanced studies (ok as optional advanced studies in SDE programme)

• TIE-21107 Software Engineering Methodologies, 5 cr, periods 3-4 in TUT
• TIE-21307 Large Scale Software Design, 5 cr, periods 3-4 in TUT
• TIE-20306 Principles of Programming Languages, 5 cr, periods1-2 in TUT

Intermediate studies (ok as optional studies)

• TIE-23546 Cloud platforms, 5 cr, periods1-2 in TUT

1. Check the courses in Study offerings.
2. Update your personal study plan (fill in the TUT course) and send it to your study advisor for approval.
3. Apply for study right in Service for Cross-Institutional Studies.
4. Note the enrollment deadlines in TUT.

Enroll on the course TIETA6 Data Structures in NettiOpsu

Self studying, weekly excercises, practical work, and exam.

Enroll on Demola page by 7.10.

Intermediate studies (ok as optional studies)

• TIE-23546 Cloud platforms, 5 cr, periods1-2 in TUT

1. Check the courses in Study offerings.
2. Update your personal study plan (fill in the TUT course) and send it to your study advisor for approval.
3. Apply for study right in Service for Cross-Institutional Studies

Teachers:

• Zheying Zhang (SDE)
• Jaakko Peltonen (CBDA)
• Martti Juhola (CBDA)

In cases where more students register for a course than space allows, priority is assigned as follows:

1. First priority is given to the degree students of the University of Tampere.
2. Second priority is given to the exchange students of the University of Tampere.
3. Third priority is given to the Tampere3 students and to the high school students of the UTA Teacher Training School.

In addition, there is a quota of 5 for the Open University students in every group.

This module is made up of class sessions including group work (20 hours), as well as independent out of class tasks (61 hours). The module will be three periods long and will take place in the autumn semester of the first year of the master’s degree programme.

This module is made up of class sessions including group work (20 hours), as well as independent out of class tasks (61 hours). The module will be three periods long and will take place in the autumn semester of the first year of the master’s degree programme.

If you wish to complete the course during the academic year 2018-2019, contact the teacher no later than March 15, 2019.

This module (54 hours) is online apart from individual teacher-student tutorials for discussion of the submitted thesis extract. The work consists of readings, group analysis tasks and thesis writing work. Students should take the module after their research proposal has been accepted by their programme and they are about to embark upon the writing of their thesis.

Essays and exam

Practical work and written report

The seminar will concentrate on the MSc. thesis work. It is suitable for students who are in/approaching to the MSc thesis writing procedure. It is recommended to the students in their 2nd year of MSc degree studies.

Course related material will be uploaded and maintained in Moodle.

Please send your updated study plan to teacher before first seminar meeting.

Advanced studies (ok as optional advanced studies in SDE programme)

• TIE-21107 Software Engineering Methodologies, 5 cr, periods 3-4 in TUT
• TIE-21307 Large Scale Software Design, 5 cr, periods 3-4 in TUT
• TIE-20306 Principles of Programming Languages, 5 cr, periods1-2 in TUT

Intermediate studies (ok as optional studies)

• TIE-23546 Cloud platforms, 5 cr, periods1-2 in TUT

1. Check the courses in Study offerings.
2. Update your personal study plan (fill in the TUT course) and send it to your study advisor for approval.
3. Apply for study right in Service for Cross-Institutional Studies.
4. Note the enrollment deadlines in TUT.

Teachers:

• Zheying Zhang (SDE)
• Jaakko Peltonen (CBDA)
• Martti Juhola (CBDA)

In cases where more students register for a course than space allows, priority is assigned as follows:

1. First priority is given to the degree students of the University of Tampere.
2. Second priority is given to the exchange students of the University of Tampere.
3. Third priority is given to the Tampere3 students and to the high school students of the UTA Teacher Training School.

In addition, there is a quota of 5 for the Open University students in every group.

This module is made up of class sessions including group work (20 hours), as well as independent out of class tasks (61 hours). The module will be three periods long and will take place in the autumn semester of the first year of the master’s degree programme.

This module is made up of class sessions including group work (20 hours), as well as independent out of class tasks (61 hours). The module will be three periods long and will take place in the autumn semester of the first year of the master’s degree programme.

If you wish to complete the course during the academic year 2018-2019, contact the teacher no later than March 15, 2019.

This module (54 hours) is online apart from individual teacher-student tutorials for discussion of the submitted thesis extract. The work consists of readings, group analysis tasks and thesis writing work. Students should take the module after their research proposal has been accepted by their programme and they are about to embark upon the writing of their thesis.

Essays and exam

Practical work and written report

The seminar will concentrate on the MSc. thesis work. It is suitable for students who are in/approaching to the MSc thesis writing procedure. It is recommended to the students in their 2nd year of MSc degree studies.

Course related material will be uploaded and maintained in Moodle.

Please send your updated study plan to teacher before first seminar meeting.

Advanced studies (ok as optional advanced studies in SDE programme)

• TIE-21107 Software Engineering Methodologies, 5 cr, periods 3-4 in TUT
• TIE-21307 Large Scale Software Design, 5 cr, periods 3-4 in TUT
• TIE-20306 Principles of Programming Languages, 5 cr, periods1-2 in TUT

Intermediate studies (ok as optional studies)

• TIE-23546 Cloud platforms, 5 cr, periods1-2 in TUT

1. Check the courses in Study offerings.
2. Update your personal study plan (fill in the TUT course) and send it to your study advisor for approval.
3. Apply for study right in Service for Cross-Institutional Studies.
4. Note the enrollment deadlines in TUT.

Teachers:

• Zheying Zhang (SDE)
• Jaakko Peltonen (CBDA)
• Martti Juhola (CBDA)

This module is made up of class sessions including group work (20 hours), as well as independent out of class tasks (61 hours). The module will be three periods long and will take place in the autumn semester of the first year of the master’s degree programme.

If you wish to complete the course during the academic year 2018-2019, contact the teacher no later than March 15, 2019.

This module (54 hours) is online apart from individual teacher-student tutorials for discussion of the submitted thesis extract. The work consists of readings, group analysis tasks and thesis writing work. Students should take the module after their research proposal has been accepted by their programme and they are about to embark upon the writing of their thesis.

Mietityttääkö gradun aloitus? Etsitkö aihetta gradullesi?

Jos olet aloittamassa gradua kesällä tai tulevana syksynä, tilaisuus on sinua varten!

Keskiviikkona 8.5. klo 16.00 Olohuoneessa Pinni B1029-30 pidetään tutkinto-ohjelman info- ja keskustelutilaisuus pro gradu -tutkielmaa aloittaville opiskelijoille

Ohjelmassa mm. 

- infoa pro gradun aloituksesta ja aiheen/ohjaajan löytämisestä

- mahdollisia ohjaajia ja aihealueita

- keskustelua maisteriohjelmakohtaisissa ryhmissä

Tilaisuuteen on vapaaehtoinen ilmoittautuminen, voit jättää ilmoittautuessa ennakkokysymyksiä

--

Need inspiraton for thesis subject?

Have you already started planning your thesis? Do you need inspiration and ideas to come up with a reasonable thesis subject?

You are warmly welcome to meet us and learn about the M.Sc. Thesis process and to get thesis subject tips from the professors and teachers on
Wednesday 8th May, 16.00 in lounge, Pinni B1029-30.

Agenda:

- info about Thesis process, finding a supervisor and thesis subject areas, and

- discussion in smaller groups.

Optional enrollment in NettiOpsu.

If you already have questions/comments in mind about the meeting, please add the in NettiOpsu when enrolling.